Высококачественные панели из натурального дерева производители и поставщики в Китае. Мы продукт: Дерево акустические панели ПЭТ панели
Получить предложение ×

Чтобы избежать задержки ответа на ваш запрос, пожалуйста, введите ваш WhatsApp/Skype вместе с сообщением, чтобы мы могли связаться с вами в первый же раз.

    Мы ответим вам в течение 24 часов. Если для срочного случая, пожалуйста, добавьте WhatsApp/WeChat: +86-13678899682 непосредственно.

    18
    2026/11

    Do Soundproof Wood Panels Block Noise? What They Really Do

    Wood panels sold as “soundproof” usually absorb sound inside a room, which reduces echo and reverberation, but on their own they do not stop noise passing through a wall. Blocking noise between rooms depends on the wall or ceiling construction behind the panel. Specify wood panels for in-room acoustics, and keep “soundproofing” for the partition.

    What “soundproof” means on a product page

    Search phrases such as “sound proof wooden board” and “wood paneling soundproof” are shorthand. A buyer who types them wants a quieter space, and a quieter space can come from two different mechanisms.

    Term What it controls Typical rating label Where the performance comes from
    Поглощение звука Echo, reverberation and speech clarity inside the room NRC or a similar absorption coefficient Porous or fibrous material that takes sound energy out of the room
    Sound insulation (isolation) Noise passing from one space to another STC, Rw or a similar sound-reduction rating Mass, airtight joints and layered or decoupled wall and ceiling construction

    A акустическая панель из деревянных реек sits in the first row. Compared with marketplace listings that attach “soundproof” to any wood board, and with wood-fibre insulation boards that form a layer inside a wall build-up, a slat panel with felt backing has a narrower job: it takes up sound that is already in the room so that less of it bounces back to the people inside.
    The label matters for procurement because the same word ends up in the bill of quantities, and the client reads it as a promise about the room next door.

    акустические панели из деревянных реек

    How a wood slat panel treats sound

    BEIEN’s BN-01 to BN-05 profiles are built from MDF slats, a wood veneer or decorative surface, and a polyester-fibre acoustic backing. The backing is the part that absorbs. The slats and veneer give the finished look and let sound reach the felt through the gaps between them.
    At 18 or 21 mm overall, the panel behaves as a finish layer fixed to an existing surface. It adds no sealed airspace and no decoupling from the structure, which is why it cannot stand in for a partition.

    Which noise problems can wood slat panels fix?

    Situation Do wood slat panels help? What addresses the actual cause
    Echo in a meeting room, hall or reception area Yes. In-room absorption is the job of the felt backing. Panels on walls or ceiling; area and placement set by the designer or acoustic consultant
    Hard-to-follow speech in a classroom or lecture room Yes, as part of reverberation control Absorptive surfaces on walls and ceiling, sized to a target the consultant sets
    Voices from the next office through a stud partition Not on their own Partition upgrade: added mass, sealed joints, layered or decoupled construction
    Noise through a door or around its frame Нет Door set and perimeter seals
    Footfall noise from the floor above Нет Floor build-up or ceiling construction designed for impact noise

    Where two rows apply at once, such as a training room with both echo and corridor leakage, treat them as two jobs with two lines in the budget.

    Four misreadings that cause complaints after handover

    1. The product name is read as a performance claim. “Soundproof panel” in a specification invites the end client to expect silence from the adjoining room.
    2. Panels are fixed over a partition that still has open paths. Gaps at ceiling junctions, service penetrations and door perimeters pass sound whatever covers the wall face. The weakest path sets the result, so panels over a leaky partition leave the leak where it was.
    3. A calmer-sounding room is mistaken for an isolated one. Absorption lowers reverberation, so people inside often feel the space is quieter. The level reaching the adjacent room is a separate quantity and can be unchanged.
    4. A certificate is read as an acoustic result. Fire, chain-of-custody and decorative-wall-covering documents exist for BEIEN products (see the certificate table below). None of them reports an absorption or insulation figure.

    деревянные реечные стеновые панели

    Write the specification so the client’s expectation matches

    1. State the problem in the brief as two separate lines: “reduce reverberation in Room X” and, if needed, “limit speech transfer between Room X and Room Y”.
    2. Put the panels under an absorption heading. In the bill of quantities, call them “wood slat acoustic panels” or “acoustic absorption panels”, not “soundproof panels”.
    3. Put partition requirements under their own heading, written as a performance requirement for the wall or ceiling assembly and set by the designer or acoustic consultant, not by the panel supplier.
    4. Ask the panel supplier for data that names the exact model, thickness, backing and mounting method the figure refers to.
    5. Add one sentence to the client handover note, using wording like the sample below.

    Wood slat acoustic panels, model [BN-xx], [18 or 21] mm, polyester-fibre acoustic backing, supplied to reduce reverberation and echo within the room.

    BN-01 to BN-05: the parameters buyers ask for

    Parameter Stated value
    Models BN-01, BN-02, BN-03, BN-04, BN-05 (profiles shown in the 2026 catalog)
    Standard sizes 2400 × 605 × 18/21 mm; 2700 × 605 × 18/21 mm; 3000 × 605 × 18/21 mm; other dimensions by customization
    Construction MDF slats, wood veneer or decorative surface, polyester-fibre acoustic backing
    MDF density Approximately 760–800 kg/m³
    Veneer thickness Approximately 0.4–0.5 mm
    Raw-material policy E0-grade MDF
    Backing PET acoustic felt produced in-house
    CNC cutting tolerance ±0.3 mm, as stated by BEIEN
    Приложения Стены и потолки
    Customization OEM and ODM service covering colors, dimensions, shapes, surfaces, labels, logos and packaging
    Production lead time Approximately 7–15 working days, depending on order quantity and customization
    Price Quotation-based; depends on panel type, dimensions, thickness, surface finish, fire-performance requirements, customization level, packaging, order quantity and shipping terms

    What the certificates cover

    Document Reference What it covers
    FSC Chain of Custody (GFA Certification GmbH) GFA-COC-008037, valid 29 October 2024 to 28 October 2029 Chain of custody for wood products within the certificate scope, which includes wooden sound-absorbing boards
    CE Type Examination (CSI S.p.A.) DE/7552, valid 11 June 2024 to 10 June 2029 Decorative wall covering, model “BEIEN WALL PANEL”, referenced to EN 15102:2007+A1:2011
    Fire classification (SGS-CSTC, EN 13501-1:2018) Report SHFS2403000289FF Class B-s2,d0 for sample BN-002, a 9 mm board of 100% polyester fibre

    Before any of these goes into a submittal, ask BEIEN to confirm in writing which document covers your exact model, material and order.

    Trade-offs worth weighing before you specify

    On the plus side, the BN series gives a timber-faced finish for in-room acoustics on both walls and ceilings, in lengths of 2400, 2700 and 3000 mm, with colors, sizes, surfaces and packaging adjustable through OEM and ODM service. The MDF follows an E0-grade policy, and FSC chain-of-custody coverage exists for wood products within the certificate scope.
    The limits are the ones that change decisions. The panels will not fix noise passing between rooms. No absorption figure for the series is published today, so a consultant cannot model its effect on reverberation from BEIEN’s material alone. The only fire classification on file belongs to a polyester sample, not to the wood slat construction, so a project that needs a fire rating for BN panels must raise that requirement at quotation stage.

    ЧАСТО ЗАДАВАЕМЫЕ ВОПРОСЫ

     Can wood paneling soundproof a room?

    Not by itself. Wood paneling with felt backing absorbs sound inside the room and reduces echo. Stopping noise between rooms needs a wall or ceiling assembly with mass, sealed joints and, where required, decoupling. List the two as separate items in the specification.

     Will a sound proof wooden board block noise from next door?

    A board fixed to the surface of an existing wall leaves the weak paths in that wall unchanged, such as open joints, gaps and service penetrations. If the complaint is about noise from the adjoining space, the partition is where the fix belongs.

    Do wood slat panels reduce echo in meeting rooms and classrooms?

    Reducing echo is what the polyester-fibre backing is for. How much it helps depends on panel area, placement and the data for the specific model.

    Can BN-series panels be used on ceilings?

    BEIEN states that its wood slat panels are available for walls and ceilings. Confirm the fixing method and hardware for ceiling installation with BEIEN before you specify.

     What should I send BEIEN to get a quote and model-specific data?

    Send the profile (BN-01 to BN-05), length and thickness (18 or 21 mm), quantity, whether the panels go on walls or ceilings, finish, any fire-classification requirement, packaging needs, destination and preferred shipping term (EXW, FOB, CIF and DDP are offered). Add the absorption data you need and the mounting method you plan to use, so the supplier can say whether a report exists for that configuration.

    оставьте нам сообщение